EcooGraphix Negative DOP Processless Thermal CTP Plate
1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging, without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
3.Specification
Plate Technical Specification | |
Model |
ECOO-G |
Plate Type |
Non-ablation thermal-negative type |
Application |
High grade commercial and newspaper printing |
Substrate |
Electrolyte graining and Anodized AL substrate |
Thickness |
{{0}}.15mm / 0.30mm |
Spectrum scope |
800-850nm |
Platesetter |
Various dominant thermal platesetters in the market |
Low-energy imaging |
130150mJ/m² |
The period of latent image stabilization |
Less than or equal to 7days |
Recommended screen method |
199 @200Lpi AM/20u FM and mixture |
The paper number of start-up |
50> |
Safety Light |
1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
Processing |
Without processing,directly on press |
Run Length |
100,000 impressions,actual run length depends on printing conditions |
Baking |
No recommended |
Characteristics | |
Negative non-ablation photosensitive system | |
Compatible with the dominant devices in the market | |
Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter | |
Good dot reproduction,stable performance,wide processing latitude | |
Long stability of latent image,can be stored at least a week after plate-making | |
High quality aluminum substrate,professional coating formulation | |
Application | |
Suitable for sheet-fed offset press or high speed rotary offset press | |
Run length:100,000 impressions | |
Suitable for different types of traditional inks and fountain solutions,including alcohol's substitutes as fountain solutions | |
Unsuitable to improve run length by baking plates | |
Transportation and Storage | |
Packed in seal and stored by means of preventing from light/moisture, over heat and high humidity. | |
Recommended conditions:18 degree 24 degree ,40 percent 50 percent RH. |
2. Technical features
Plate
Features |
ECOO-G |
Kodak Sonora XP |
Sensitive wavelength(nm) |
800-850 |
800-850 |
Coating color |
Light grey |
Light green |
Sensitivity(mj/cm2) |
150 |
150 |
Exposure in safe light |
White light 1 hour; yellow light 24 hours |
White light 1 hour; yellow light 24 hours |
After image contrast |
Can be spotted by eyes, but auto punching machine cannot recognize it |
Can be spotted by eyes, auto punching machine can recognize it |
Imaging device |
Normal thermal CTP device |
Normal thermal CTP device |
Resolution |
1-99 percent @ 200lpi (dependent on CTP capability) |
1-99 percent @ 200lpi (dependent on CTP capability) |
Run-length |
100,000 |
100,000 |
Storage |
12 month (under recommend environment) |
12 month (under recommend environment) |
Applied parameters in Imaging device
CTP model Data |
Kodak trendsetters |
LOTTEM 400(TH1.7) |
MAGNUS 400 |
Screen 8600S |
Laser power |
15-17W |
300-320mw |
19.5-21.5W |
80-90 percent |
Drum speed |
250-300rpm |
850-900rpm |
400-450rpm |
800-900rpm |
Resolution |
Customized |
Customized |
Customized |
Customized |
Parameter that need set up |
Focus/ Zoom |
Focus/ Zoom |
Focus/ Zoom |
Focus/ Zoom |
ECOO-G has a wide range of exposure energy, the range is 140-200mj/cm2 (similar range to Sonora XP plate), and the dot gain percentage is not much different within this range.
Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length; while over high/low exposure energy will affect the image quality negatively.
Recommended application to press procedures of ECOO-G:
Clean all the inks on the blanket;
Start the press machine, apply the water roller, run 30-40 seconds;
Apply the ink rollers 20-30 seconds;
Apply the paper and start print.
Remark: If operate step 2 and 3 longer, paper will be wasted less.
EcooGraphix offers most complete plate portfolio with each plate complying with international leading quality standard.
● Thermal line: Ecoo-ES single layer thermal plate; Ecoo-ED Double layer thermal plate; Ecoo-TSR super runlength double layer thermal plate; Ecoo-G, processless (DOP, development on Press) plate,
● UV-CTP line: Ecoo-CTCP-ES, single layer ctcp plate; Ecoo-CTCP-ED, double layer ctcp plate; Ecoo-H, processless CTCP plate (DOP)
● Violet: Ecoo-V, violet plate for commercial and newspaper
● PS plate
Ecoo Plates offers supreme quality and batch to batch consistency with best industrial production lines and quality management system.
There are following major factors contributing to our top quality and best economic efficiency.
● First class and brand new international production facility. 35 meters per minute line achieves high productivity, max plate width 1325mm.
● 3 steps of quality control systems: constant online digital inspection system, constant online worker selective examination, 100 percent manual inspection
● Stringent quality standard: Plate thickness, cutting quality, packaging quality strictly complying with ISO 9000 standard and strictly complying with product parameters.
● Best quality raw material:
● Aluminum: only use South Western Aluminum, Best quality aluminum roll manufacturer. This ensures the plate substrate quality.
● Coating emulsion: use imported international top quality emulsion
http://ru.ecoographixsolution.com/